Floor frame, Note, Step 5 – Arrow Storage Products KM1010 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 5
Parts Needed For
Floor Frame
I Front Floor Assembly (1)
' Side Floor Assembly (2)
> Rear Floor Assembly (1)
S I 8
1
Assemble the four corners of the
floor frame using two screws at each
corner as shown. At the front corners
fasten
bolts
through
from
the bottom with nuts on top.
2
Measure the floor frame diago
nally. When the diagonal measure
ments are equal, the floor frame is
square.
NOTE
If using a wood platform or
concrete slab do not fasten the
floor frames to your base at this
time. You will anchor the
building after it is erected.
NOTE
' you have purchased a Floor
Frame Kit you need to
install it at this time.
When Diagonal Measurements
are Equal the Floor Frame
is Square.
STEP
The floor frame must be square
and level or holes will not align
18