Gables/braces, Step 11 – Arrow Storage Products KM1010 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Step 11
Parts Needed For
Gables/Braces
• Left Gable Assemblies (2)
• Right Gable Assemblies (2)
• 6635 Gable Brace (2)
1
Lift and fasten a right and left
gable, under angle at corner, to the
door track and rear wall angle with
screws.
Hint:
On the rear gable, use a bolt
and nut at the overlapping rear wall
angle. On the front gable, leave out 2
screws closest to center gable leg.
2
Join the
left
and
right gabies
together with a
gable brace
using a
bolt and nut in the bottom hole
only.
3
Repeat Steps 1 & 2 for the door
track on the front of building, except
24
Advertising