Step 12, Roof beams – Arrow Storage Products KM1010 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Step 12
Parts Needed For
Roof Beams
' Main Roof Beam (1)
' Single Roof Beam (2)
1
Spread the two halves of the
main
roof beam
and fasten the roof beam
to the gable brace of the front gable.
2
Fasten the other end of the main
roof beam to the gable brace of the
rear gable.
3
Fasten the
single roof beams,
small holes on top, as shown using
bolts and nuts.
Single Roof Beam Assembly
Main Roof Beam Assembly
25
Advertising