Parts needed for, Door installation & adjustment, Step 18 – Arrow Storage Products KM1010 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 18
• Parts Needed For #
Door Installation & Adjustment
’ Right Door Assembly (1)
' Left Door Assembly (1)
1
From inside the building, put the
bottom of the right door assembly (on
your left when you are inside the
building) behind door jamb into the
front frame track.
2
Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
3
Fasten the door to the door slides
using two #10Bx1/2" screws per door
slide.
NOTE
The holes in the door slides allow
you to adjust the doors. Place the
door in the middle holes.
4
Repeat steps 1 through 3 for the
left door.
STEP
Keep this Owner's Manual and Assembly Instructions for future reference. 31