ADLINK PXIe-3975 - Manual (Page 16)

4 Introduction
Memory
X
Two standard 204-pin DDR3 SODIMM sockets
X
Support for +1.5 V DDR3, 800/1066 MHz RAM up to 8 GB
total
X
Support for non-ECC unbuffered memory
Video
X DVI output supporting up to 1920x 1200 @ 60 Hz resolution
X CRT output for analog CRT route to DVI-I connector on the
faceplate, supporting up to 2048 x 1536 bpp at 75Hz
X
DVI-I connector for both digital and analog video signal out-
put
Hard Drive
Built-in 2.5” 160 GB SATA hard drive, 7200 RPM
I/O Connectivity
Dual Gigabit Ethernet controllers through two RJ-45 connectors
with speed/link/active LED on the faceplate, with upper connector
supporting Wake on LAN.
USB
Four USB 2.0 ports on the faceplate.
GPIB
Onboard IEEE488 GPIB controller through Micro-D 25-pin con-
nector on the faceplate.
ExpressCard/34
34mm wide ExpressCard expansion slot
Trigger I/O
One SMB connector on the faceplate to route an external trigger
signal to/from PXI trigger bus