ADLINK PXIe-3975 - Manual (Page 31)

Getting Started 19
PXIe-3975
2.3.12 Installing the PXIe-3975
1. Locate the system controller slot (Slot 1)
2. Depress the red locking lever and release the latch
3. Align the controller’s top and bottom edges with the card
guides, and carefully slide the PXIe-3975 into the chas-
sis, as shown
4. Elevate the latch until the PXIe-3975 is fully seated in the
chassis backplane.
5. Fasten the four mounting screws on the faceplate of
PXIe-3975, and connect all peripheral devices.