ADLINK PXIe-3975 - Manual (Page 26)

14 Getting Started
2.3.7 USB 2.0 Ports
The PXIe-3975 provides four USB 2.0 ports via USB Type A con-
nectors on the faceplate, all compatible with hi-speed, full-speed
and low-speed USB devices. Supported boot devices include USB
flash drive, USB floppy, USB CD-ROM, and others, with boot pri-
ority and device settings configurable configured in BIOS. Please
see Section 4.5: Boot Setup for more information.
Table 2-4: USB 2.0 Port Pin Assignment
NOTE: NOTE:
In the event of malfunction, clear the CMOS (please see
Section 2.3.15: Clearing CMOS Jumper (JP1)) and
reboot the system. If the system fails to respond prop-
erly, please contact ADLINK for assistance.
Pin Signal
1/5 Power 5V
2/6 USB Data-
3/7 USB Data +
4/8 Ground