ADLINK PXIe-3975 - Manual (Page 56)

44 PXI Trigger I/O Function Reference
halfway
Halfway point of trigger routing. This parameter is used only
to route the software-generated trigger signal to the SMB
connector on the faceplate. In this case, the halfway should
be set as one of the trigger bus lines, otherwise as
PXI_TRIG_VAL_NONE.
Return Code
ERR_NoError
ERR_BoardNoInit
ERR_Set_Path
A.2.5 TRIG_Trigger_Clear
Description
Clears the trigger routing setting
Supported Controllers
PXIe-3975, PXI-3950, PXI-3920, PXI-3910, PXI-3800
PXI_TRIG_VAL_TRIG5 PXI trigger bus #5
PXI_TRIG_VAL_TRIG6 PXI trigger bus #6
PXI_TRIG_VAL_TRIG7 PXI trigger bus #7
Available value Description
PXI_TRIG_VAL_NONE No halfway point
PXI_TRIG_VAL_TRIG0 PXI trigger bus #0
PXI_TRIG_VAL_TRIG1 PXI trigger bus #1
PXI_TRIG_VAL_TRIG2 PXI trigger bus #2
PXI_TRIG_VAL_TRIG3 PXI trigger bus #3
PXI_TRIG_VAL_TRIG4 PXI trigger bus #4
PXI_TRIG_VAL_TRIG5 PXI trigger bus #5
PXI_TRIG_VAL_TRIG6 PXI trigger bus #6
PXI_TRIG_VAL_TRIG7 PXI trigger bus #7
Available value Description