ADLINK PXIe-3975 - Manual (Page 40)

28 Driver Installation
3.6 Installing the Management Engine Driver
To install the management engine driver:
1. Close any running applications.
2. Insert the ADLINK All-in-One CD (x: denotes the CD-
ROM drive)
Z The WinXP ME driver is located in the directory x:\ Driver
Installation\PXI Platform\PXI controller\PXIe-
3975\ME\WinXP\Intel ME
Z
The Win7 ME driver is located in the directory x:\ Driver
Installation\PXI Platform\PXI controller\PXIe-
3975\ME\Win7\Intel ME
3. Execute MEI_ALLOS_6.1.0.1042_PV.exe or setup.exe
and follow on-screen instructions to complete the setup.
4. Reboot the system
3.7 Installing the PXI Trigger Driver
The PXIe-3975 controller provides a trigger I/O on the faceplate to
route the trigger signal to and from the PXI trigger bus. Please see
Appendix A: PXI Trigger I/O Function Reference for programming
information.
To install the PXI trigger driver:
1. Close any running applications.
2. Insert the ADLINK All-in-One CD (x: denotes the CD-
ROM drive); the PXI trigger driver is located in the direc-
tory x:\ Driver Installation\PXI Platform\PXI control-
ler\PXIe-3975\PXI_Trigger\ PXI Trigger 3.23
3. Execute PXI Trigger IO setup v323.exe and follow on-
screen instructions to complete the setup
4. Reboot the system
3.8 Installing the WDT Driver
The WDT (watchdog timer) resets the system when the operating
system or application is halted. The WDT typically starts and peri-
odically resets the timer, and when the timer is expired, the system