ADLINK aTCA-N700 - Manual (Page 37)

aTCA-RN710 User's Guide
37
„ Cold Reset triggered by Shelf manager
Figure 7-2 Cold Reset Procedure
(s) Shelf manager sends RESET command to IPMC.
①
IPMC converts the command into Cold reset signal to FPGA.
② FPGA sends Resets to LMP and all Devices including RTM.
③ MMC in RTM receives the Reset and forward the Reset to selected devices in the RTM.
Table 7-2 Signals: Cold Reset Procedure
Signal Name Descriptions
Cold RESET
PB(5) Cold RESET Command
0 : Cold RESET
1 : Normal operation
RESET RESET Command
0 : RESET
1 : Normal operation