System memory support, Direct management interface, Integrated graphics – ADLINK cPCI-6870 User Manual
Page 32
18
Functional Description
System Memory Support
X
Supports DDR2 and DDR3 SDRAM (DDR3 only on
cPCI-6870)
X
Support for DDR3 at 667, 800 and 1066 MHz
X
Two Memory Channel Configurations supported in
Dual-channel Asymmetric
X
8-GB maximum memory support
X
Support for x8 and x16 DDR2 and DDR3 devices
X
64-bit wide per channel
X
No support for ECC
Direct Management Interface
X
Chip-to-chip interface between GMCH and 82801
GMB/GHM
X
Configurable as x2 or x4 DMI lanes
X
2-GB/s (1-GB/s each direction) point-to-point interface to ICH
X
32-bit downstream address
Integrated Graphics
X
Intel Gen 5.0 integrated graphics engine with ten, fully-pro-
grammable cores
X
533-MHz core render clock @ 1.05-V core voltage
X
Low-power configuration: 320-MHz core render clock at
1.05-V core voltage
X
Supports HDMI/DVI, DP, TV-Out, LVDS, CRT and SDVO
(the cPCI-6870 implements analog CRT only)
X
Intel® Dynamic Video Memory Technology (Intel® DVMT
5.0)
X
Microsoft DirectX10 support
X
Single channel LVDS interface support: 1x18 bpp
(LVDS signals are routed to J5 connector)
X
Integrated 300-MHz DAC analog CRT
X
Analog monitor support up to QXGA
X
Support for CRT Hot-Plug