ADLINK cPCI-6870 - Manual (Page 61)

Getting Started 47
cPCI-6870
5 Getting Started
This chapter describes the installation of the following components
to the cPCI-6870 and rear transition modules:
X Memory module
X 2.5” SATA hard drive
X CompactFlash card
X cPCI-6870 CPU module installation to chassis
X RTM installation to chassis
5.1 Memory Module Installation
The cPCI-6870 Series supports dual channel DDR3-800/1066
memory in two 200-pin SO-DIMM sockets.
Installing the Memory Module
1. Align the notch in the memory module with the key on
the SO-DIMM slot.
2. Press down on the module until it is properly seated in
the socket.