ADLINK cPCI-6870 - Manual (Page 70)

56 Driver Installation
6.2 SCSI Driver
The SCSI driver is available from the ADLINK All-In-One CD at
X:cPCI\cPCI-R6001(D)\SCSI or from the ADLINK website
(http://www.adlinktech.com). The installation procedure for
Windows XP is described below. It is not necessary to install the
SCSI driver on Windows 2003 Server and Vista as it has a built-in
driver.
1. Click Start, right-click on My Computer, then select
Properties from the drop-down menu.
2. Click on the Hardware tab, then click Device Manager.
3. Right-click on the SCSI Controller item, then click Properties
from the drop-down menu.
4. From the General tab, click Reinstall Driver.
5. Select Yes, this time only and click Next when the
Upgrade Device Driver Wizard window appears.
6. Select Install from a list on specific location [Advanced],
then click Next.
7. Uncheck Search removable media [floppy, CD-ROM...],
and check Include this location in the search:, then click
Browse.
8. Select the xp_x86 folder from this directory on the ADLINK
All-In-One CD: …X:\cPCI\cPCI-R6001(D)\SCSI.
9. Click OK, then click Next.
10.Click Continue Anyway to go on, and click Finish to
complete the installation.
NOTE: NOTE:
SCSI is not supported on current model RTMs. If your RTM
supports SCSI, follow the instructions below.