ADLINK cPCI-6870 - Manual (Page 94)

80 BIOS Setup Utility
Bootup Num-Lock
This option sets the Num Lock status when the system is pow-
ered on. Setting it to On will turn on the Num Lock key when
the system is booted up. Setting it to Off will not enable the
Num Lock key on bootup.
Boot Device Priority
The items allow you to set the sequence of boot devices where
BIOS attempts to load the disk operating system. First press
<Enter> to enter the sub-menu. Then you may use the arrow
keys to select the desired device, then press <+>, <-> or
<PageUp>, <PageDown> key to move it up/down in the priority
list.
Boot Device Groups
The Boot devices are listed in groups by device type. First
press <Enter> to enter the sub-menu. Then you may use the
arrow keys to select the desired device, then press <+>, <-> or
<PageUp>, <PageDown> key to move it up/down in the priority
list. Only the first device in each device group will be available
for selection in the Boot Device Priority option.