ADLINK Express-LPC - Manual (Page 48)

Express-LPC User’s Manual Page 48
SuperIO Configuration Screen
SuperIO configuration screen is a sub-menu of Onboard Device Configuration. You can use
this screen to select options for the Super IO settings. Use the up and down < Arrow >
keys to select an item. Use the < + > and < - > keys to change the value of the selected
option. The settings are described on the following pages. The screen is shown below. The
visibility of this SuperIO configuration screen depends on the presence of an onboard
SuperIO (Winbond W83627HF). If the Express-LPC is used on carrier w/o a SIO chip, the
legacy-free mode will take effect.
Floppy A
Use this field to specify options for the Floppy Configuration Settings.
Options: Disabled, 360 KB 5 ¼”, 1.2 MB 5 ¼”, 720 KB 3 ½”, 1.44 MB 3 ½”, 2.88 MB 3 ½”.
OnBoard Floppy Controller
This option enables/disables the Super IO’s floppy controller.