ADLINK Express-LPC - Manual (Page 66)

Express-LPC User’s Manual Page 66
Bootup Num-Lock
Set this value to allow the Number Lock setting to be modified during boot up.
Off - This option does not enable the keyboard Number Lock automatically. To use the 10-
keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the
10-key pad. The Number Lock LED on the keyboard will light up when the Number Lock is
engaged.
On - Set this value to allow the Number Lock on the keyboard to be enabled automatically
when the computer system is boot up. This allows the immediate use of 10-keys numeric
keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on
the keyboard will be lit.
PS/2 Mouse Support
Allows you to Enable/Disable PS/2 mouse support.
Wait for ‘F1’ If Error
If this option is set to Disabled, AMIBIOS does not wait for you to press the <F1> key after an error
message.
Hit ‘DEL’ Message Display
When set to Enabled, the system displays the message "Press DEL to run Setup during POST".
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When enabled, this BIOS
feature allows the AddOn ROM of these host adaptors to “capture” Interrupt 19 during the boot
process so that drives attached to these adaptors can function as bootable disks. In addition, it
allows you to gain access to the host adaptor’s AddOn ROM setup utility, if one is available.
When disabled, the AddOn ROM of these host adaptors will not be able to “capture” interrupt 19.
Therefore, you will not be able to boot operating systems from any bootable disks attached to
these host adaptors. Nor will you be able to gain access to their AddOn ROM utilities.