ADLINK Express-LPC - Manual (Page 54)

Express-LPC User’s Manual Page 54
8.3.9 PCIPnP Configuration
You can use this screen to specify options for Plug and Play BIOS Configuration.
Clear NVRAM
This option clears ESCD (Extended System Configuration Data) information in NVRAM.
Plug & Play O/S
When set to "Yes" and a Plug and Play operating system is installed, the operating system
configures the Plug and Play devices not required for boot.
PCI Latency Timer
Set this value to allow the PCI Latency Timer to be adjusted. This option sets the latency of
all PCI devices on the PCI bus.
Allocate IRQ to PCI VGA
When set to "Yes", the BIOS will assign an IRQ for a PCI VGA card.
IRQ
Set this value to allow the IRQ settings to be modified. Available - This setting allows the
specified IRQ to be used by a PCI/PnP device. Reserved - This setting allows the specified
IRQ to be used by a legacy ISA device.