ADLINK Express-LPC - Manual (Page 50)

Express-LPC User’s Manual Page 50
8.3.7 USB Configuration
USB Configuration Settings
You can use this screen to specify options for the USB configuration Settings. Use the up and
down < Arrow > keys to select an item. Use the < + > and < - > keys to change the value of
the selected option. The settings are described on the following pages. The screen is shown below.
Parallel Port IRQ
This option specifies the IRQ used by the parallel port.
Option Description
IRQ5 Set this value to allow the serial port to use Interrupt 5.
IRQ7 Set this value to allow the serial port to use Interrupt 7. The majority of parallel ports on computer
systems use IRQ7 and I/O Port 378H as the standard setting.