ADLINK Medical-i7 18/21 - Manual (Page 12)

PENTA Medical i5/i7
Manual
Rev. 1.5
Document: Manual_Medical_i7_R1.5.docx Page 12 of 59 pages Last change date: 7-Mar-13
6.2. Interfaces for attachable devices
6.2.1. Overview connector side
1 Potential equalization 6 USB 2.0
2 COM1 7 Line out
3 VGA 8 Mic in
4 HDMI 9 PCIe 16x slot bracket
5 GBit Ethernet 10 HDD slide-in
.1 LAN1 Intel® 82577 11 RS232 (gal. isolated)
.2 LAN2 Intel® 82574 12 AC in
6.2.2. Serial Port COM1
RS232, max. 115.200 Baud (max. cable length <2m), DB-9, 9pin, male
Warning for medical appliances:
Accessory equipment connected to the analogue and digital interfaces must be
certified according to the respective IEC standards (e.g. IEC 950 for data
processing equipment and IEC 601-1 for medical equipment). Furthermore all
configurations shall comply with the valid version of the system standard IEC
601-1-1. Everybody who connects additional equipment to the signal input part
or signal output part configures a medical system, and is therefore responsible
that the system complies with the requirements of the valid version of the
system standard IEC 601-1-1. If in doubt, consult the technical service
department or your local representative.
!