ADLINK Medical-i7 18/21 - Manual (Page 57)

PENTA Medical i5/i7
Manual
Rev. 1.5
Document: Manual_Medical_i7_R1.5.docx Page 57 of 59 pages Last change date: 7-Mar-13
Invalid changes of BIOS settings can make your system useless or will cause
data loss and/or hardware damage!
Any damages and/or problems caused through invalid BIOS changes will not
be covered by warranty!
Hazardous voltages are present in this electrical equipment during operation.
Failure to proper equipment maintenance can result in death, severe personal
injury or substantial property damage. The instructions contained in this
chapter have to be followed.
•
Maintenance shall be performed only by qualified personal.
•
Always de-energise and ground the equipment before maintenance.
•
ESD can destroy your Hardware – always ground yourself before touching
parts inside the
PENTA product.
•
Use only authorised parts to repair/upgrade the equipment.
•
Unqualified intervention will cause system damage and leads to warranty
loss.
Applicable local or national safety regulations and rules for the prevention of
accidents must be observed in all work performed.
Computer components are highly sensitive devices. ESD and wrong treatment
can damage and destroy your IPC and / or your add-on cards.
Only qualified personnel should handle your computer hardware
Beware from ESD – ground yourself and your hardware first!
Warning for medical appliances:
Accessory equipment connected to the analog and digital interfaces must be
certified according to the respective IEC standards (e.g. IEC 950 for data
processing equipment and IEC 601-1 for medical equipment). Furthermore all
configurations shall comply with the valid version of the system standard IEC
601-1-1. Everybody who connects additional equipment to the signal input part
or signal output part configures a medical system, and is therefore responsible
that the system complies with the requirements of the valid version of the
system standard IEC 601-1-1. If in doubt, consult the technical service
department or your local representative.
The product may be operated only under the operating conditions specified by
PENTA.
Do not place the device on heat-generating devices such as radiators or fan
heaters. The temperature of the environment must not exceed the maximum
temperature specified in this manual.
Do not place the device inside a closed housing unless this is well ventilated.
Please be aware that in the event of a fire, toxic substances (gases, liquids,
etc.) that may be hazardous to your health may escape from your
PENTA
device.
As with all industrially manufactured goods, the use of substances that induce
an allergic reaction (e.g. nickel, aluminium) cannot be generally excluded. If
you develop an allergic reaction (such as a skin rash, frequent sneezing, red
eyes or respiratory difficulties), consult a physician immediately to determine
!
!
!
!
!
!
!