ADLINK Medical-i7 18/21 - Manual (Page 55)

PENTA Medical i5/i7
Manual
Rev. 1.5
Document: Manual_Medical_i7_R1.5.docx Page 55 of 59 pages Last change date: 7-Mar-13
12. C
OMMON WARNINGS
,
HANDLING AND SAFETY INSTRUCTIONS
Only use an original power-supply provided by PENTA. If you need to use
another power-supply, ask your PENTA partner for authorisation. Non
observance can result in property damage, severe personal injury and the loss
of your warranty!
Before connecting the power cable all peripheral devices (e.g.
keyboard/mouse …) must be connected to your
PENTA IPC. Non-Observance
can result in property damage. Please see appropriate chapters for additional
information about installation of peripheral devices!
Never use the product if the power cable is damaged. By taking appropriate
safety measures and carefully laying the power cable, ensure that the cable
cannot be damaged and that no one can be hurt by. e.g. tripping over the cable
or suffering an electric shock.
Do not insert the plug into sockets that are dusty and dirty. Insert the plug
firmly and all the way into the socket. Otherwise this can result in sparks, fire
and/or injuries.
Do not overload any sockets, extension cords or connector strips. Doing so
can case fire or electric shocks.
Operating is permitted only on sockets with earthing contact and protective
earth connection.
Intentionally breaking the protective earth connection either in the feed line or
in the product itself is not permitted. Doing so can result in the danger of an
electric shock from the product. If extension cords or connector strips are
implemented, the must be checked on a regular basis to ensure that they are
safe to use.
Use suitable overvoltage protection to ensure that no overvoltage (e.g. such as
that caused by a thunderstorm) can reach the product. Otherwise the operating
personnel will be endangered by electric shocks.
If the product has no power switch for disconnection from the AC supply, the
plug of the connecting cable is regarded as the disconnecting device. In such
cases, it must be ensured that the power plug is easily reachable and
accessible at all times. If the device is integrated in racks or systems, a
disconnecting device must be provided at the system level.
!
!
!
!
!
!
!
!