Ambir ImageScan Pro 820i - Manual (Page 15)

15
Step 3. Installing the Extended Paper Width Slider
1. Open the ADF cover by pulling the gray lever, and get the right and left
extended paper width sliders ready.
2. Align and insert the left extended paper width
slider onto the paper width slider on the left.
Position and insert the right extended paper
width slider onto the paper width slider on the
right.
3. Close the ADF cover by pushing it back down
until it snaps back into place.
Step 4. Installing the Stacker
Information
Stacker installation is optional.
Insert the tabs on the stacker into their slots on the
scanner.
I
nstalling
A
dditional
S
oftware