Ambir ImageScan Pro 820i - Manual (Page 24)

24
Information
If you usually scan images with the same
settings, you can define a scan profile to
save the settings you have configured by
entering a name or description for this new
profile in the white area beside the word
Profile and then click the Save button.
Whenever you want to scan similar
documents and apply the same settings,
you can just select this profile from the
drop-down list and click the Scan button.
Click the Help button within the TWAIN window for more information about
the settings.
Scanning from the Scanner’s Front Panel
Completing your scanning projects using the scanner buttons is easy and
convenient. The number assigned to a scanning task displayed on the
scanner’s front panel is configured through AmbirScan ADF. AmbirScan ADF
offers you quick access to the most frequently-used scanning functions.
They are especially useful when you need to repeatedly scan with the same
settings and send images to the same destination. Before performing your
first scan via scanner buttons, first configure the button settings with your
preferences.
Scan from the Scanner Buttons
1. Place the document or images onto the scanner. (Refer to CHAPTER II.
Scanning‖ of the Scanner User’s Guide for more information in placing
paper into the ADF properly.)
2. Check current button settings by viewing the memo sticker or the
Button Configuration window. If needed, you may also modify settings
to meet your current needs. (Refer to ―View Button Settings‖ and
―Configure Button Settings‖ below for more information.)
3. Press the UP or DOWN button to select the desired task.
4. Press the Scan button.
The scanner starts to scan immediately, carrying out the corresponding
action according to settings in the Button Configuration window.
Attention
Only scan text documents with the OCR
setting. Do not scan a photo using the OCR
button.