Ambir ImageScan Pro 820i - Manual (Page 28)

28
Cleaning the ADF
1. Open the ADF cover by pulling the gray lever.
2. Gently wipe the following areas with the cloth dampened with the
cleaner. Be careful not to scratch their surfaces.
Clean Feed Roller:
Wipe the Feed Roller from side to side and then rotate it. Repeat until its
entire surface is cleaned.
Clean Pad Module:
Wipe the Pad Module from top to bottom (in the direction of arrow shown in
below picture). Be careful not to damage the pick springs of the pad.
Cover lever
ADF cover