Cino L780BT HC - Manual (Page 10)

Out-of-range Scanning
When the radio is connected between the scanner and the remote host
device, the scanner will transmit each scanned data right after scanning the
barcode. However, the scanner is preset for unable to scan any barcode data
when it loses the radio connection with the remote host device.
If you enable the out-of-range scanning function, the scanner is able to
continue scanning barcode data while it is out of working range. All scanned
data will be temporarily stored into the memory buffer until radio link resumed.
Enable Out-of-range Scanning
Disable Out-of-range Scanning ◆
In case of the scanner is out of working range, you will hear 4 beeps in
descending tone to indicate the radio connection lost. The link indicator of
scanner will give 3 blue blinks per 2 seconds. Once the scanner is back to
working range, you will hear 4 beeps in ascending tone to indicate the radio
connection rebuilt and the scanner will give 1 blue blink per 2.5 seconds. At
the same time, all stored scanned data will be transmitted automatically right
after the radio link is resumed.
Presentation Scanning
The Presentation Scanning is designed for hand-free applications for user’s
convenience. If the “Presentation Scanning Auto-sense” function is enabled,
the scanner is capable of automatically switching to presentation mode when
you place it onto the SmartStand or cradle.
9
Enable Presentation Scanning Auto-sense
Disable Presentation Scanning Auto-sense
◆
Paging Function
The paging function is helpful for you to locate the paired smart cradle or
scanner. If you would like to page the paired smart cradle, you can scan
“Paging” command. If you would like to page the paired scanner, you can
press the paging/reset button of the smart cradle no longer than 3 seconds.
Paging/Reset Button
Paging