Cino L780BT HC - Manual (Page 12)

If you scanned a wrong barcode, the “Delete Last Scanned Data’’ command
is helpful to recover mistake. By scanning the ‘’Delete Last Scanned Data’’
command, the last stored data can be deleted.
Delete Last Scanned Data
Use Quantity Feature
If you want to use the quantity feature, please scan “Enable Quantity Field
Transmission” command to enable this function.
Disable Quantity Field Transmission ◆
Enable Quantity Field Transmission
Once the quantity feature is enabled, you can enter the quantity from 1 to
9999 by scanning the quantity barcodes right after you scanned the barcode.
The quantity information will be stored into the memory storage together with
each scanned barcode data.
Quantity 0 Quantity 7
Quantity 4
Quantity 1 Quantity 8
Quantity 5
Quantity 2 Quantity 9
Quantity 6
Quantity 3
There are two ways to output the stored barcode data and quantity
information listed below:
y
The preset output format is to transmit stored data as many times as the
quantity indicated.
y
You can choose to outpt the stored data together with quantity information
in two fields, and a prest delimter “ , “ will be outputted in between. To fulfill
different application requirements, both the delimiter and output sequency
can be changed as well.
11