Cino L780BT HC - Manual (Page 8)

Use FuzzyScan in SPP Mode
Establish SPP Master Connection
Ensure the battery is fully charged. Please go to the folder of “Hardware”
located in Bluetooth Advanced Setting of the remote host device to check
its device MAC address. Then prepare a 12-character Code 128 barcode
of the remote host device MAC address, or follow the step 4 to input MAC
address by scanning 12 option codes.
Ensure a virtual COM port is available in your remote host for connecting
the scanner. If not, please go to the folder of “Local Services” located in
Bluetooth Advanced Setting. Click the “Add Serial Services” to add one
more Bluetooth COM port.
Power on the scanner within radio range and ensure the status indicator
of scanner gives alternating red and green blinks (in “Uninstall” state).
If the scanner is not in uninstall state, please scan the “Uninstall”
command first. Then scan the “SPP Master Mode” command, and the
status indicator of scanner will turn steady red.
Uninstall
SPP Master Mode
Scan a 12-character MAC address barcode, or scan 12 option codes and
“FIN” command to confirm your inputs. The scanner will give continuous
short clicks and the link indicator of the scanner will flash blue quickly
during the radio connecting process. If the PIN Code or Passkey is
requested for security connection, please enter “00000000” (default
setting).
The scanner will give 4 beeps in ascending tone to indicate the radio is
connected. At the same time, the link indicator of scanner will give 1 blue
blink per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner failed to connect to the host device within
30 seconds, the link indicator will give 3 blue blinks per 2 seconds. But
the scanner is still continuing to discover the host device for another 30
seconds before go to sleep. In the interim, you still can scan “Uninstall”
command to revert the scanner to uninstall state. If the scanner goes to
sleep already, you just need to press the trigger to wake up the scanner to
continue the installation.
The installation procedures vary on different remote host devices,
operating systems and the Bluetooth software drivers. Please consult
your professional IT consultant to obtain necessary support if any
problem has been encountered during the installation processes.
7