Installation and start-up – Clay Paky ALPHA PROFILE 800 “ST” User Manual
Page 13
Advertising
13
ALPHA PROFILE 800 “ST”
INSTALLATION AND START-UP
4
1
2
3
2
1
5
Connecting and disconnecting power cable - Fig. 5
Installing the projector - Fig. 4
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:
with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request).
This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.
Advertising