Clay Paky ALPHA PROFILE 800 “ST” - Manual (Page 20)

20 ALPHA PROFILE 800 “ST”
On
Off
Display
AUTO-FOCUS MODE
It lets you select the “Auto-focus Mode” from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following set-
tings:
Limited Zoom Range: The “Autofocus” works only in the optical run that
was specifically designed for the projector in question.
Complete Zoom Range: The “Autofocus” also works in overrun
3) Press F to confirm the selection or LEFT D to keep the current setting.
MACRO EFFECTS
It lets you select the “Macro Effects” set up from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Macro group size
It lets you set the number of projectors to be included in the macro mode
operation.
1) Press
F
2) Use the UP B , DOWN C , RIGHT keys to set the number of projectors
to be included in the “Macro Effect” operation.
3) Press F to confirm the selection or LEFT D to keep the current setting.
Macro fixture Id
It lets you attribute an ID address to the projector for the phase displacement
for the scene’s starting time in Macro mode.
1) Press
F
2) Use the UP B and DOWN C keys to select one of the following settings:
Fixed to X. (to assign to all the projectors to be included in the Macro
operation).
Auto by DMX Address: According to the DMX address, it automatically
detects the starting sequence of the scene in the Macro mode (to assign
to all the projectors to be included in the Macro operation).
3) Press F to confirm the selection or LEFT D to keep the current setting.
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off) the
decreasing of display brightness.
3) Press F to confirm the selection or LEFT D to keep current settings.
SETTING
Used to save 3 different settings of the items in the options menu and relative
submenus.
1) Press
F - “Default preset” appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
configurations:
- Default preset (*)
- User preset 1
- User preset 2
- User Preset 3
3) Press F - “Load preset X” appears on the display.
4) Use the UP B and DOWN C keys to select:
- Load preset X to recall a previously stored configuration.
- Save to preset X to store the current configuration.
a confirmation message (Are you sure?) appears on the display.
5) Select YES to confirm the selection or NO to keep the current setting and
return to the next higher level.
(*) DEFAULT PRESET
By pressing the RIGHT
E key and the LEFT D key simultaneously
once entered in the "main menu" it is possible to quickly (short cut)
reset the default settings (DEFAULT PRESET).
Used for restoring default values on all options menu items and relevant
submenus.
1) Press
F , a confirmation message (Are you sure?) appears on the display.
2) Select YES to confirm the selction or NO to keep current setting.
OPTION DEFAULT
Macro
Effects
Macro fixture Id
Macro group
size
Auto-focus
Mode
Limited
Zoom Range
Complete
Zoom Range
Reset To
Dafault
Go Back
Setting
Default
Preset
Load
Preset 1
Save To
Preset 1
User
Preset 1
Load
Preset 2
Save To
Preset 2
User
Preset 2
Load
Preset 3
Save To
Preset 3
User
Preset 3