Clay Paky ALPHA PROFILE 800 “ST” - Manual (Page 19)

19 ALPHA PROFILE 800 “ST”
Shutter
Shutter
On Error
On
Off
Dimmer On
Shutter
On
Off
Tilt Home Def Pos
Lets you assign the Tilt channel “home” position at the end of Reset,
without a DMX input signal.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
0%
12.5%
25%
50% (default)
75%
87.5%
100%
3) Press F to confirm the selection or LEFT D to keep the current
setting.
COLOR
Color mixing
Used for reversing the CMY color mixing system.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys select one of the following settings:
RGB color mixing mode
CMY color mixing mode
3) Press F to confirm the selection or LEFT D to keep current settings.
Color mixing curve
It lets you select the “Color mixing curve” from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Curve 1
Curve 2
3) Press F to confirm the selection or LEFT D to keep the current setting.
Fixed wheel short-cut
Used for optimizing color change time so that the disc turns in the direc-
tion that requires shorter movement.
1) Press
F – the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
color change optimization.
3) Press F to confirm the selection, or LEFT D to keep current settings.
Macro color adjustment
It lets you enable the overwriting of a “Macro Colour” with the Cyan,
Magenta, Yellow, CTO and Colour wheel channels.
Press
F the current setting appears on the display.
1) Use the UP B and DOWN C keys to enable (On) or disable (Off)
the overwriting.
2) Press F to confirm the selection or LEFT D to keep the current setting.
SHUTTER
Shutter on error
Used for automatically closing the stop/strobe in the event of Pan/Tilt
position error.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
automatic stop/strobe closing in the event of Pan/Tilt position error.
3) Press F to confirm the selection, or LEFT D to keep current settings.
Dimmer on Shutter
Enables automatic closing of the dimmer when the strobe is completely closed.
1) Press
F – the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off) the
automatic closing of the dimmer.
3) Press F to confirm the selection or LEFT D to keep current
Color
Color
Mixing
RGB
CMY
Fixwheel
Shortcut
On
Off
Macro Color
Adjustment
On
Off
Color
Mixing curve
Curve 1
Curve 2
Option Pan / Tilt
Tilt Home
Def Pos
Continued ➔