A13 14 – Clay Paky ALPHA PROFILE 800 “ST” User Manual
Page 25
Advertising
25
ALPHA PROFILE 800 “ST”
Lower Side
Upper Side
2
Lower Side
A
Upper Side
3
1
A
A
13
14
1
2
12
Lamp change - Fig 13
Take the new lamp out of its package and insert in the fitting.
WARNING:
do not touch the lamp’s envelope with bare hands.
Should this happen, clean the bulb with a cloth soaked in alcohol
and dry it with a clean, dry cloth.
IMPORTANT:
Make sure the lamp is inserted with the external
contact (A) facing the elliptical reflector’s slot.
CAUTION:
Fast lamp ON-OFF cycles (for example 10 minutes ON / 10 minutes
OFF) will reduce the lamp life.
Lamp regulation - Fig. 14
To centre the lamp, turn the three adjusting screws as shown in the figure.
Opening and closing lamp compartment - Fig. 12
Continued
➔
Advertising