Ditch Witch FXT50 - Manual (Page 76)

FX50 Operator’s Manual
Service - 75
Precautions
CMW
Working Under Raised Tank Door
1. Locate door lock tools in tool storage area and bring
to rear of tank.
2. Raise tank door completely.
3. Pin door lock tools into place as shown.
4. Lower tank lid until load is supported by door lock
tools.
Welding Precaution
Washing Precaution
Crushing weight could cause death or serious injury. Use proper
procedures and equipment or stay away.
To help avoid injury: Use tools (provided with unit) if unit must be serviced with tank
door up.
NOTICE: Welding can damage electronics.
• Disconnect battery to prevent damage to battery. Do not turn off battery disconnect switch with
engine running, or alternator and other electronic devices may be damaged.
• Connect welder ground clamp close to welding point and make sure no electronic components are
in the ground path.
• Always disconnect the Engine Control Unit ground connection from the frame, harness connections
to the ECU, and other electronic components prior to welding on machine or attachments.
NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components
with water.
j36om019w.eps