Ditch Witch FXT50 - Manual (Page 93)

Service - 92
FX50 Operator’s Manual
50 Hour
CMW
Check Fan Belt Tension
Check fan belt tension every 50 hours. Belt is
properly tensioned when it moves about 3/8” (10
mm) when pushed at the long span (shown).
Adjust as needed. See “Adjust Fan Belt Tension”
on page 102.
Check Blower Belt Tension
Check belt every 10 hours for correct tension,
damage or wear. Replace worn belt. Both ends of
tube must touch spring caps for belt to be
correctly tensioned. Tighten as needed. See
“Adjust Blower Belt Tension” on page 103.
Inspect Cooling Fan
Check for cracks, loose rivets, and bent or loose
blades. Check mounting screws and tighten if
needed.
j36om073w.eps
j36om012w.eps
j36om060w.eps