Ditch Witch SK350 - Manual (Page 45)

Complete the Job - 44
SK350 Operator’s Manual
Rinse Equipment
CMW
Rinse Equipment
1. Spray water onto equipment to remove dirt and mud, especially at undercarriage.
2. Open hood and remove debris from inside of unit.
3. Remove mud from track sprockets.
Disconnect Attachment
1. Lower attachment to the ground.
2. Ensure that all controls are in neutral.
3. Turn off engine.
4. Apply parking brake.
5. Disengage lock pins by turning handles away from center of attachment.
6. Cycle attachment drive control and disconnect hydraulic hoses, if used.
7. Disengage parking brake.
8. Start engine.
9. Tilt mount plate forward and back unit away from attachment.
Stow Tools
Make sure all tools and accessories are loaded and properly secured on trailer.
NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged.
Wipe down instead.