Ditch Witch SK350 - Manual (Page 64)

SK350 Operator’s Manual
Service - 63
As Needed
CMW
5. Pull tensioner back and slip belt off of the idler
pulley.
6. Remove belt from pulleys and carefully work it
around fan and through the fan hole.
7. Remove belt through opening.
8. Install new belt in reverse order of removal and
position tensioners to contact belt.
9. Adjust belt tension. See page 55 for belt adjustment
procedure.
10. Start engine and check operation.
11. Stop engine, open hood, and re-check belt alignment.
12. Close hood.
Moving parts could cut off hand or foot. Stay away.
NOTICE: Do not open hood for inspection or service with engine running.
Runaway possible. Machine could run over you or others. Learn how to
use all controls. Start and operate only from operator’s position.
NOTICE: Do not leave operator station with engine running.