As needed, Sk350 operator’s manual – Ditch Witch SK350 User Manual
Page 63
Advertising
Service - 62
SK350 Operator’s Manual
As Needed
CMW
As Needed
Change Drive Belt
Change drive belt as needed when worn or damaged.
1.
Stop engine and allow to cool before attempting service.
2.
Engage parking brake.
3.
Remove key from ignition switch.
4.
Open hood and note routing and alignment of
belt.Drive belt goes in pulley groove closest to the
cooling fan.
Location
Task
Notes
Traction Unit
Change drive belts
Jump start
.
Hot parts may cause burns. Do not touch until cool.
NOTICE: Allow engine to cool before touching parts or performing any service.
Advertising