Lcas sink - error, Crc-3/crc-8 error analysis – EXFO FTB-8100 Series Transport Blazer for FTB-500 User Manual
Page 500
Advertising
Next-Generation Tabs
486
FTB-8100 Series Transport Blazer
LCAS Sink
LCAS Sink - Error
Press TEST, LCAS and Error (under LCAS Sink).
Note: Not available in Through mode.
³
Member indicates the timeslot number.
³
SQ (Sequence Indicator): Indicates the member sequence indicator.
The SQ for members in IDLE state will be automatically set to 63 for
LOP or 255 for HOP.
CRC-3/CRC-8 Error Analysis
Indicates respectively a CRC-3 (for LOP) or CRC-8 (for HOP) error.
Note: Refer to Alarm/Error Measurements on page 47 for H/C LEDs, Seconds,
Count, and Rate information.
Advertising