EXFO FTB-8100 Series Transport Blazer for FTB-500 User Manual
Page 78
Advertising
Creating and Starting a Test Case
64
FTB-8100 Series Transport Blazer
Introducing the Test Setup
³
The Test node is the root of the test case. It allows the configuration of
the test name, clock mode and test mode.
³
The Connector node allows the selection and configuration of the
physical port.
³
The Signal node allows the selection and configuration of the signal.
Additional signal nodes are created for each step of the mapped signal
level.
³
The Payload/Traffic node completes the test path by selecting the
pattern or an external traffic such as Ethernet interface with Packet
Blazer.
Advertising