Maintenance, System test, Capacities and replacement parts – E-Z-GO EXPRESS L6 User Manual

Page 64

Advertising
background image

MAINTENANCE

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

5 - 12

5

Generally, three classes of standard hardware and two classes of metric hardware are used in the vehicle. Grade 5

hardware can be identified by the three marks on the hexagonal head and grade 8 hardware is identified by 6 marks

on the head. Metric hardware is marked on the head with 8.8 or 10.9. Unmarked hardware is Grade 2.

SYSTEM TEST

At monthly intervals, test the controller by allowing the vehicle to roll down an incline with the accelerator pedal

released. Braking force should be felt at approximately 2 mph (3 kph) indicating that the system is functioning. If vehicle

speed continues to rise, apply the service brake and have vehicle inspected by a trained mechanic.

CAPACITIES AND REPLACEMENT PARTS

Rear Axle Oil
Fuse
Headlight Bulb
LED Bulb
Turn Signal Bulb
Tail Light Bulb

40 oz (1.2 liters) / SAE 30
15 amp (P/N 18392-G1)

#1157 (P/N 21759-G1)

Capacities and Replacement Parts

(P/N 619100)

(P/N 619101)

(P/N 619102)

Advertising
This manual is related to the following products: