Hall Research VSA-51-R User Manual
Page 11
Advertising
Digital AV Room Control System
9
VSA-UI-DP Rear
9. Receiver RJ45 port. Connects directly to “UI Control” port on VSA-51-R receiver via Cat5 cable. This link
handles communication and sends power to the UI panel from the receiver.
10. Expansion Header for optional extended control panel (VSA-UI-8).
11. IR/Serial Port. Provides captive screw terminals for IR and secondary RS232 output. The diagram below shows
the pin out for the Phoenix connector.
Advertising
This manual is related to the following products: