Hanna Instruments HI 903 - Manual (Page 62)

4-12
GENERAL OPTIONS
Configure the settings on the titrator Balance Configuration menu to match the settings for
your particular balance (baud rate, data bits, parity, stop bit number, request command
syntax). It may be necessary to change settings on your balance. Users should consult their
balance instruction manual.
Before leaving this screen be sure the connection with the balance is working properly by
pressing the
key.
4.14 Printer mode
This screen allows the user to select the printing mode: ANSI (default), ASCII and Text
mode.
ANSI mode:
Use this mode when your printer is set to ANSI. In this case all accepted characters /
symbols available on the titrator will be printed by your printer.
ASCII mode:
Use this mode when your printer is set to ASCII. In this case only some of the
accented characters / symbols available on the titrator will print.
Text mode:
Use this when you don’t need to print the accented characters.