Heath Consultants EyeCGas - Manual (Page 27)

EYE-C-GAS user's manual
Page 27 P/N PS8G9006-Rev 1
www.heathus.com www.opgal.com
6 EYE-C-GAS Software "ARTSOFT"
ArtSoft is a virtual “control panel” for the EYE-C-GAS infrared camera. Contained on a CD,
ArtSoft facilitates various system operations for the EYE-C-GAS including time and date setting,
system version verification, software and firmware updating and file management, conversion
and playback. ArtSoft is a Windows XP, Vista and 7 compatible program.
6.1 Installation of the software
Insert the CD into the PC.
Run the Artsoft application file (Artsoft_v1.0.2.5 setup.exe).
Follow the installation instructions located in Appendix A.
Note: If the software Dot Net Framework is already installed in your computer there is no need to
install it again.
6.2 Connecting the EYE-C-GAS to the PC
Run the Artsoft software on the PC.
Connect the camera to the PC through the mini USB to USB cable (supplied) to the USB
connection connector in the front panel of the EYE-C-GAS (Figure 1) and the PC USB
connector. Wait (about 2 minutes XP and 10 seconds in Windows 7) until the connection is
recognized and proceed to download movies or perform other functions.
Figure 24: Welcome screen and communication search