Heath Consultants Remote Methane Leak Detector (RML) - Manual (Page 13)

Battery Charger
The RMLD is provided with a universal AC battery charger. The plug of the charger can
be changed to fit the type of receptacle used in your location.
Charging Procedure
To recharge the internal battery, perform the following procedure:
1. Turn the instrument off.
2. Plug the AC plug into a surge-protected outlet.
3. Plug the charger plug into the RMLD charger port.
4. A blinking green light indicates that the charger is charging.
5. Allow the unit to charge until the green indicator is on solid.
6. Unplug the charger.
Fig. 2-2
**Warning**
Only use the HEATH supplied RMLD battery charger to recharge the
unit. Use of any other charger may cause severe damage to the battery
or electrical circuits.
Page 13 of 36
101515-0 RMLD MANUAL REV E