Heath Consultants Remote Methane Leak Detector (RML) - Manual (Page 14)

Chapter III
Operating the RMLD
This chapter provides information on the use of the RMLD. It provides an explanation of
working with the menu, setting operational parameters, or enabling functions of the
instrument.
Battery
Indicator
DMD icon
Gas
Concentration
Volume
Warning
DMD button
Error
Backlight icon
Up Down button Select button Re-Try Self-Test OK
Spotter icon
Fig. 3-1
Figure 1: RMLD front panel and display. (Note: for illustration, all the display icons are shown.
During actual operation, only the icons associated with an active function will be displayed)
DMD button: press to turn on/off the DMD mode.
Up adjust button: press to increase a value or to acknowledge a user prompt.
Down adjust button: press to decrease a value.
Select button: press to scroll through the menu options.
Display:
Battery Indicator: displays the amount of battery charge.
Gas Concentration: displays the amount of gas in ppm-m. Over range is
indicated by a 1-------.
Volume: displays the volume level of the speaker and headphone
Warning: icon indicating that the instrument is outside of an operation limit.
Error: icon indicating that a fault condition has occurred; the instrument is no
longer functioning properly.
DMD: icon indicating that the DMD detection mode is on.
Spotter: icon indicating that the spotter laser is enabled.
Backlight: icon indicating that the backlight is on.
Re-try: icon indicating that the self-test failed and should be performed again.
Self-Test: icon indicating that the self-test mode is enabled.
OK: icon indicating that the self-test successfully completed.
Page 14 of 36
101515-0 RMLD MANUAL REV E