Lab.gruppen C Series 88:4 - Manual (Page 11)

3. Installation
4
C Series C 88:4, C 68:4, C 48:4, C 28:4 and C 16:4 Operation Manual rev 2.2.3
3. Installation
3.1 Unpacking
Carefully open the shipping carton and check for any noticeable damage. Every Lab.gruppen amplifier is tested
and inspected before leaving the factory and should arrive in perfect condition. If any damage is discovered,
please notify the shipping company immediately. Only the consignee may institute a claim with the carrier for
damage incurred during shipping. Save the carton and packing materials for the carrier’s inspection. Should
you ever need to ship the amplifier, always use the original packaging materials.
3.2 Mounting
The amplifier is two rack units high (2U) and will fit into a standard EIA 19” rack. The depth is 343 mm (13.5”).
The weight is approximately 8.5 kg (18.75 lbs.) depending on model type.
Free airflow from front-to-rear of the amplifier must be possible. Therefore, no doors or rack-lids should be
mounted in front of or behind the amplifiers.
Amplifiers may be stacked directly on top of each other. There is no need for spacing in between units, though
this might enable more convenient installation of cabling on the rear panel.