Labconco Purifie Horizontal Clean Benches 32000 Series - Manual (Page 22)

Chapter 3: Getting Started
Product Service 1-800-522-7658 18
3. Remove the Torx Head Screws on top side and top back of unit to remove
Top Window as seen in Figure 3-5c.
4. Remove the two Bolts and Washers underneath Worksurface as shown in
Figure 3-5c.
5. Pull up on front edge of Worksurface, and then pull Worksurface out.
6. Reinstall components in reverse to reassemble the XT Clean Bench.
Figure 3-5c
Top
Window
Worksurface
Bolts & Washers
Worksurface