Input, Processing, Output – Lumagen Radiance Mini-3D User Manual
Page 42: Miscellaneous
Section 11 – Specifications
Radiance Mini
rev 091211
34
Section 11 – Specifications
Input
•
2 video/audio HDMI
®
1.4 inputs:
o
480i to 1080p60, plus HDMI 1.4a 3D formats
Processing
•
10-bit processing front-end with 12-bit calibration pipeline
•
Proprietary Lumagen “No-ring” ™ scaling
•
Support for HDMI 1.4a “3D”
•
Each input has 4 user configuration memories, with 8 resolution sub-memories for each
•
2:2, 3:2 and 3:3 pull-down for SD/HD film sources
•
Per-pixel SD/HD video de-interlacing
•
Adaptive diagonal filtering
•
MPEG mosquito and block artifact reduction
•
Temporal noise reduction for SD/HD sources
•
User programmable non-linear-stretch (NLS) mode, 4:3 to 16:9 or 16:9/1.85 to 2.35
•
4:3, LBOX, 16:9, 1.85, 2.35 and NLS input aspect ratios
•
Programmable output aspect ratio from 1.33 to 2.50
•
Support for anamorphic lenses
•
Extensive suite of test patterns
•
Parametric grayscale calibration, 2,5,10,11 or 21 point
•
Parametric Gamma calibration, 2,5,10,11 or 21 point
•
Programmable input/output color-space
•
Y/C-delay calibration
•
User-adjustable image enhancement
•
CUE and ICP filtering
•
Supports HDCP
Output
•
1 HDMI 1.4 “3D”, 480p to 1080p and 1080i
•
Eight channel audio at 192 kHz
•
HDMI inputs and outputs support DD True-HD™, and DTS Master Audio™
•
HDMI output provides “stand-by” power to external device of +5V at 50 mA
Miscellaneous
•
IR and RS232 control (See Tech Tip 11 and 12 on the
www.lumagen.com
website)
•
Universal Power Supply, INPUT: 100-240V at ~50/60Hz. OUTPUT: 5.0 VDC, 4.0A
•
Power consumption: 13 Watts