Lumagen Radiance Mini-3D - Manual (Page 9)

Section 1 – Getting Started
Radiance Mini rev 091211 1
Section 1 – Introduction
Thank you for purchasing a Lumagen ® Radiance™ video processor. The award winning Lumagen Radiance
video processor family boasts the highest-performance video switching, processing and calibration available.
This makes it ideal for premium quality high-definition home and commercial theater applications.
Lumagen’s Radiance series refines and enhances the video images presented by high definition front
projectors, top-level rear-screen and flat-panel displays.
The Radiance family offers 10-bit front-end, and 12-bit back-end, processing, per-pixel standard definition
(SD) and high definition (HD) video de-interlacing with adaptive diagonal filtering, No-Ring™ scaling
technology that does not add ringing (unlike competing products), MPEG mosquito and block artifact
reduction plus “3D” temporal noise reduction for both SD and HD sources. It supports HDMI
®
1.4 “3D” and
uncompressed audio formats for Dolby-Digital TrueHD™ and DTS Master-Audio™. At the same time
Radiance processors can function as a central switching hub for the audio video system. For these reasons,
the Radiance™ processor family sets the industry benchmark for switching, calibration and video processing
performance.
Key Features
•
10-bit processing for deinterlacing plus a 12-bit calibration pipeline
•
Proprietary Lumagen No-ring™ scaling
•
Support for HDMI
®
1.4 “3D” including anamorphic lens and conversion to a specific 3D output format
•
Each input has 4 user configuration memories
•
Each input user configuration memory has 8 resolution sub-memories
•
Each resolution sub-memory is linked to one of 8 output configurations.
•
2:2, 3:2 and 3:3 pull-down for SD/HD film sources
•
Per-pixel SD/HD video de-interlacing
• Adaptive diagonal filtering
•
MPEG mosquito and block artifact reduction
• Temporal noise reduction for SD and HD sources
•
Output resolution from 480p to 1080p, plus 1080i
•
User programmable non-linear-stretch (NLS) mode
•
4:3, LBOX, 16:9, 1.85, 2.35 and NLS input aspect ratios
•
Programmable output aspect ratio from 1.10 to 2.50
•
Extensive support for anamorphic lenses for both 2D and 3D video
•
Automatic detection for NTSC, PAL and SECAM
• Extensive suite of test patterns
•
Parametric grayscale and Gamma calibration
• Full CMS (Color Management System) using a 3D linear-gamma color palette
•
Programmable input/output color-space
•
Y/C-delay calibration
•
CUE and ICP filtering
•
Eight channel audio up to 192 kHz, DD True-HD™ 5.1, and DTS Master Audio™ 5.1
• IR and RS232 control inputs (See Tech Tip 11 and 12 on the Lumagen.com support page)
•
Universal, 100-240V~50/60Hz input power supply
• Power consumption 13 Watts