Luxul XWR-1750 - Manual (Page 11)

11
User Guide
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Select the Menu Quick Setup and Connection Type PPPOE from the dropdown to
view the following page:
„
Internet/WAN: Displays the WAN connection Options
w
Connection Type: Select the desired WAN Connection Type. When set to
PPPOE, enter a Username and Password that the ISP provides to authenticate the
Router allowing it to connect. The Router will pull all connection information
automatically from the ISP’s Modem once it is successfully authenticated.
DHCP is the default setting.
w
Username: Allows you to enter the PPPOE Username specified by the ISP.
w
Password: Allows you to enter the PPPOE Password specified by the ISP.
w
Max Failed Pings: Allows you to specify the Maximum number of Failed Pings
to the PPPOE Server before the Router attempts to re-authenticate to the PPOE
Sever. We recommend the default value of 3 attempts unless the ISP recommends a
different value.
w
Ping Interval: Allows you to specify the number of seconds to wait between Ping
attempts to the PPPOE Server. We recommend the default value of 5 seconds in
order to preserve WAN resources.
w
Primary DNS: Allows you to select the checkbox and manually configure a Primary
DNS Server IP Address. “DNS Assigned By ISP” is the default setting.
w
Secondary DNS: Allows you to select the checkbox and manually configure a
Secondary DNS Server IP Address. “DNS Assigned By ISP” is the default setting.