Luxul XWR-1750 - Manual (Page 9)

9
User Guide
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
7. At the newly opened command interface enter the following command: ping
192.168.0.1 and press enter. If connected properly, the system should report back a
result as follows: packets sent=4, packets received=4, packets lost=0. This means the
device is connected with a valid IP address.
3 CONFIGURATION
This chapter introduces the configuration of the XWR-1750 Enterprise Multi-WAN
Router functions via the Web-based management interface.
„
Quick Setup
„
Status
„
Network
„
Wireless
„
Guest Network
„
Firewall/Security
„
QoS
„
VPN
„
Administration
„
Tools
3.1 Quick Setup
The Quick Setup page allows you to configure the Primary Internet / WAN connec-
tion settings and the Local Network / LAN settings. This page is intended to get your
Internet connection up and running as quick and painless as possible.
3.1.1 Connection Type DHCP
This Connection Type option will automatically pull the WAN IP, WAN Subnet Mask,
WAN Gateway, WAN Primary DNS and WAN Secondary DNS from your ISP’s Modem.
Select the Menu Quick Setup and Connection Type DHCP from the dropdown to view
the following page: